History of Theatre

History of Theatre Early in the 1700's British people that were involved with theatre were mostly middle class. There were 2 kinds of new dramatic theatre: sentimental comedy and domestic tragedy. The fist playhouse was in the American colonies was built in Williamsburg, Virginia. In 1741 the greatest British actor was born and his name was David Garrick. Aeschylus wrote the first major playwright and multiple contests. â€Å"The Orestria† was the last remaining tragic trilogy. Sophocles pioneered painted scenery and added the third choral leader, wrote â€Å"Antigone. Euripides went against popular belief and pioneered female protagonist. Aristophanes was the first comedian and made fun of current leaders, rated â€Å"M† for mature. Gotthold Ephraim Lessing was the head German dramatist during the Enlightenment, as well as a critic, a philosopher, and an aesthetician. His works advocated liberal thinking and religious tolerance. He wrote the first German plays of â₠¬Å"Note and Sought† to make German drama as an entity seperate from French and classical influences. Johann Wolfgang von Goethe is permanently associated with the German romantic movement and is the major literary figure in German history. A true Renaissance man, he was a novelist, playwright, translator, natural philosopher, poet, musician, composer, scientist, and finally a historian. His Faust is a â€Å"closet drama†, a work in dramatic form to be read not performed. In the late 1700's, German theatre changed dramatically by the Romantic movement known as â€Å"Sturm und Drang† (storm and stress). In 1773, British playwright Oliver Goldsmith attacked the popular sentimental comedy and proposed a more humorous and realistic â€Å"laughing comedy. † In his fast paced comedy She Stoops to Conquer, Goldsmith had achieved his goal. Rich Brinsley Sheridan got into sentimental comedy in the 1770's with his plays The Rivals and The School for Scandal. The American Revolution had a crippling effect on all forms of theatre. Congress passed a resolution discouraging theatrical â€Å"entertainments†, and after the U. S. eclared independence, the individual states passed laws forbidding all stage performances. Most of the anti-theatre laws remained in effect until the early 1780's. construction of the Paris Opera House began in 1861 and was completed in 1875. The idea for a protected performance area arose after a royal procession escorting Napoleon the third and his wife to the opera was bombed by a group of revels and scores were killed. Napoleon wanted an opera house where royalty could enter less publicly, and created a contest calling for new designs. The architect Charles Garnier won. The Paris Opera House has 17 stories, covers three acres of land, and seats 2000 people. Gaston Leroux's novel The Phantom of the Opera took place here and Andrew Lloyd Webber's musical based on this too. The â€Å"Father of modern drama,† was a Norwegian playwright who's name is Henrik Ibsen. James A. Herne began his theatre career as a very good actor. Later he became a stage manager at Baldwin's Academy of Music in California, a job that brought him many more roles. In 1878, he married the actress Katherine Corcoran, a member of the Baldwin acting company, and began a career as a playwright to write leading parts for him and his wife. Naturalism was a theatrical school of thought developed in the late 1800's and early 1900's. it introduced sets that looked as real as possible, characters who spoke in a natural way, and story lines that were plausible. The primary spokesperson for early naturalism was French novelist Emile Zola(1840 – 1902).

Amnesty for Illegal Immigrants Essay

The United States of America was founded and built by hardworking and innovative immigrants. Immigrants, whether legal or illegal, perform most of the dirty and arduous jobs that many native-born Americans are unwilling to perform. They are hardworking and taxpaying individuals that positively impact our economy and our communities. Many immigrants, especially illegal immigrants (those who enter the United States illegally or without proper documentation) work long hours and for little pay. There are over 12 million illegal immigrants in the United States who deserve a chance to have a good job, earn citizenship and become a legal member of American society. According to the Organization for U.S. Immigration Support, amnesty can be defined as â€Å"the government’s pardon for violating policies relating to immigration or politics† (Amnesty for Illegal Immigration 1). The federal government forgives these individuals for using false documentations to more easily get employment in the United States and be able to remain in the country. Amnesties allow illegal immigrants or undocumented workers to gain permanent residency in the United States. In 1986, the United States granted its first amnesty to millions of illegal immigrants, allowing them to receive a Green Card which could lead to the attainment of United States citizenship. Granting amnesty to illegal immigrants is beneficial to the United States because it will bolster the U.S. economy, increase tax revenues, and allow millions of people to attain the American dream of homeownership and education, thus benefiting American society. For these reasons, all illegal immigrants should be granted amnesty. Illegal immigrants are beneficial to the United States economy. They perform the necessary high labor and menial jobs that many native-born Americans are unwilling to do. According to the March 6th 2007 issue of Conservative Politics: U.S. , President George W. Bush was quoted as saying, â€Å"There are people doing jobs Americans will not do. Many people who have come into our country are helping our economy grow. That is just a fact of life† (Illegal Aliens: Helpful or Harmful to America? 1). Increasingly fewer educated, native-born American workers are unwilling or unable to perform the strenuous jobs that don’t even require a high school diploma†¦but immigrants are. According to an immigration policy brief written by Rob Paral of the American Immigration Law Foundation, it is evident that immigrants come here  to fill available jobs by the â€Å"fact that, as of 2005, 94% of adult male undocumented immigrants and 86% of adult male legal immigrants were in th e labor force. Immigrants are already an integral part of U.S. society and an indispensable part of the U.S. labor force† (Paral 1). Illegal immigrants also contribute to the United States economy by purchasing American goods and services. They purchase houses, automobiles, as well as, patronize the local supermarkets and Mom and Pop stores. Francine Lipman of the Chapman University, School of Law strongly believes that â€Å"undocumented immigrants contribute to the U.S. economy through their investments and consumption of goods and services; filling of millions of essential worker positions resulting in subsidiary job creation, increased productivity and lower costs of goods and services† (Lipman 1). Lower consumer prices are one of the many contributions that immigrants make to our economy. Annually, illegal immigrants contribute at least 300 billion dollars to the U.S. gross national product (Immigrant Workers: Making Valuable Contributions to Our Communities and Our Economy 1). Even though there are critics who are adamantly against granting amnesty to illegal immigrants, a survey conducted by the Social Science Research Network concluded that 85% of prominent economists felt that illegal immigrants have had a positive impact on the United States economy (Lipman 1). Granting amnesty to illegal immigrants will increase United States tax revenues. Amnesty will provide illegal immigrants with a tax identification number or a social security number. Thus allowing over 12 million non-U.S. citizens who are living and working illegally in the United States to file taxes and prove their economic contribution, as well as, document their residence. Amnesty allows illegal immigrants to file their taxes without fear of being deported, in turn more people will file their taxes, thus increasing tax revenues. The Center for Immigration Studies estimates show â€Å"that amnesty would significantly increase tax revenues. Because both their income and tax compliance would rise, we estimate that under the most likely scenario the average illegal alien household would pay 77% ($3,200.00) more a year in federal taxes once legalized; therefore, amnesty would significantly increase both the average income and tax payments of illegal immigrants† (The High Cost o f Cheap Labor 1). Everyone who works in the  United States is required to pay taxes. On average illegal immigrants pay about $4,200.00 in federal taxes. Almost half of this tax revenue goes directly to Social Security and Medicare (Illegal Aliens: Helpful or Harmful to America? 1). Despite America’s strong history of opposing taxation without representation, undocumented immigrants are required to pay taxes, but do not have a voice in American society. They don’t have the right to vote at any level, be it local, state or federal. Nonetheless, every year illegal immigrants contribute billions of dollars in property, sales, excise, income and payroll taxes to federal, state and local funds. According to a paper written by Francine Lipman entitled, â€Å"Taxing Undocumented Immigrants: Separate, Unequal and Without Representation†, she states that â€Å"undocumented [workers] actually contribute more to public coffers in taxes than they cost in social services. They also make unrequited contributions to Social Security, Medicare, and unemployment insurance programs† (Lipman 1). Hundreds of thousands of illegal immigrants file federal and state income tax returns each year even though they are barred from receiving all government benefits including Food Stamps, Medicaid, Federal Housing, Unemployment Insurance, Social Security and the Earned Income Tax Credit. This is a clear example of taxation without representation. Granting amnesty to illegal immigrants would fix this social injustice in America, as well as, bolster the United States tax revenues because once legalized, illegal immigrants will be paying more money annually in federal taxes. If illegal immigrants are granted amnesty then millions of hardworking people would finally be able to attain the American dream, thus benefiting themselves and American society. Amnesty will allow illegal immigrants to purchase property and homes. As a result, communities will be revitalized. Illegal immigrants would be able to set down their roots and integrate into American society. According to an article written by Sue Kirchhoff, entitled, â€Å"Immigrants Chase American Dream†, an estimated â€Å"8 million to 10 million foreign born people are in the United States illegally, lacking documents to get a mortgage† (Kirchhoff 3). Granting amnesty to illegal immigrants would alleviate this problem because they would be able to purchase homes which would keep the American housing market strong, which in  turn leads to a healthy economy. Illegal immigrants are an increasingly important factor in the American housing market because by the purchasing of homes they are revitalizing inner cities, changing the appearance of suburbs and prompting subtle changes in home design, therefore, many economists believe that the United States housing market will remain strong as a result of the elevated rates of both legal and illegal immigration in the country (Kirchhoff 1). Amnesty will allow illegal immigrants to seek and attain higher education which will ultimately have a favorable impact on the United States. According to a study by Keith Maskus, an economist at the University of Colorado, and Aaditya Mattoo, a lead economist at the World Bank’s Development Economics Group, â€Å"foreign students, skilled immigrants and doctorates in science and engineering play a major role in driving scientific innovation in the United States. Their research found that for every 100 international students who receive science or engineering PhD’s from American universities, the nation gains 62 future patent applications† (Anderson 3). Education plays a crucial role in producing successful and productive citizens. There is evidence that suggests that through education immigrants improve their lives and that of their children and have very little negative impact on the nation. According to an article entitled, â€Å"Immigration Issues in the United States† in the March 1st 2004 edition of Eriposte â€Å"as immigrants leave school and become productive workers, they repay most or all of the cost of those services that they have received in the form of taxes† (Immigration Issues in the United States 3). Providing illegal immigrants with the opportunity to seek higher education is also a solution for ending poverty and foreign aid. In a June 19th 2006 open letter on immigration written by David J. Theroux and addressed to President George W. Bush, the author states that â€Å"immigration is the greatest anti-poverty program ever devised. The American dream is a reality for many immigrants who not only increase their own living standards, but who also send billions of dollars of their money back to their families in their home countries-a form of truly effective foreign aid† (Theroux 1). Immigrants, both legal and illegal, add diversity and a fresh perspective to the American business market, therefore, by granting amnesty to illegal immigrants we are  encouraging them to improve their education and skills in order to provide the United States with a more competitive labor force. In the end, amnesty favors both the nation and the illegal immigrants. The United States would positively benefit from granting amnesty to millions of illegal immigrants because of the increased economic, tax and societal benefits amnesty would bring. Immigrants, both legal and illegal, contribute their skills, innovation, capital, and culture to the American economy. They have become an indispensable asset to America, both culturally and economically. The aspiration of attaining the American dream is what inspires illegal immigrants to come to America; therefore, it is unfair to hinder or deny them in their pursuit of happiness and prosperity. After all, our country was founded and built by the sweat and hard work of immigrants, both legal and illegal. Ultimately, granting amnesty to illegal immigrants benefits both America, its people and society. Bibliography â€Å"Amnesty for Illegal Immigration.† U.S Immigration Support. 4 Mar. 2007. 7 Mar. 2007http://www.usimmigrationsupport.org/amnesty.html. â€Å"Illegal Aliens: Helpful or Harmful to America?† Conservative Politics: U.S. 6 Mar. 2007http://usconservatives.about.com/od/theeconomy/a/illegalaliens.htm. â€Å"Immigrant Workers: Making Valuable Contributions to Our Communities and Our Economy.† Service Employees International Union. 5 Mar. 2007 http://www.seiu.org/issues/immigration/immigration_facts.cfm. â€Å"Immigration Issues in the United States.† Eriposte. 1 Mar. 2004. 6 Mar. 2007http://www.eriposte.com/civil_rights/non-citizens/illegalimmigration.htm. â€Å"The High Cost of Cheap Labor – Illegal Immigration and the Federal Budget .† Center for Immigration Studies. 2004. 5 Mar. 2007 http://www.cis.org/articles/2004/fiscalexec.html. Allport, Allan. Immigration Policy. Philadelphia: Chelsea House Publishers, 2005. Anderson, Stuart. â€Å"The Debate Over Immigration’s Impact on U.S. Workers and the Economy .† National Foundation for American Policy. June 2006. 6 Mar. 2007http://www.meragefoundations.com. Dudley, William. Illegal Immigration: Opposing Viewpoints. San Diego: Green HavenPress, 2002. Kirchhoff, Sue. â€Å"Immigrants Chase American Dream.† USA Today 5 Aug. 2004. 5 Mar. 2007 http://www.usatoday.com/money/economy/housing/2004-08-05-immigrant-housing_x.htm. Lipman, Francine J. â€Å"Taxing Undocumented Immigrants: Separate, Unequal and Without Representation.† Social Science Research Network. 15 Feb. 2006. Chapman University – School of Law. 5 Mar. 2007 http://papers.ssrn.com/sol3/papers.cfm?abstract. Paral, Rob. â€Å"The growth and Reach of Immigration – New Census Bureau Data Underscore Importance of Immigrants in the U.S. Labor Force.† AILF. 162006. 12 Mar. 2007 http://www.ailf.org/ipc/policybrief/policybrief_2006_81606.shtml. Stern, Andrew L., Anna Burger, and Eliseo Medina. â€Å"SEIU Announces Agenda for Comprehensive Immigration Reform- Letter to Senator Kennedy.† Service Employees International Union. 17 Jan.2007. 5 Mar. 2007 http://www.seiu.org/media/pressreleases.cfm. Stevens, Christel. â€Å"The Overlooked Value of Immigrants.† Editorial. TheWashington Post 3 Feb. 2008: 6Theroux, David J. â€Å"Open letter on Immigration.† Letter to George W. Bush. 19 June 2006. 6 Mar. 2007http://www.independent.org/newsroom/article.asp?id=1727#1. Toness, Bianca Vazquez. â€Å"U.S. Tax Program for Illegal Immigrants Under Fire.† All Things Considered. National Public Radio. NPR. 5 Mar. 2007. Transcript. 10 Mar. 2007 http://www.npr.org/templates/story/story.php?storyId. Vargas, Theresa. â€Å"Pro-Limited immigration Group Links Gangs to IllegalResidents.† The Washington Post 25 Jan. 2008: B5.

A piece of wire on the resistance Essay Example for Free

A piece of wire on the resistance Essay ? Resistance gives us an idea of how easily electrons flow through a conductor it is the opposition of a material to the flow of electricity through it. It is caused by the internal structure of the material and its atoms, and tends to convert electrical energy in to heat. It is measure in ohms (? ). To measure resistance you must first find the voltage, which is the change in current between to certain points in a circuit. Electricity gives us a way of transferring energy and voltage is a measure of the energy available per coulomb of charge passing. Then you also need the current, which is measured in amps, electrical current as occur when there is a drift of charged particles (electrons or ions) in a particular direction. However there are some effects of the current flowing through a wire, it tends to heat up. If you divide both the voltage and the amps you get the resistance. Resistance = Potential Difference (in V) Current (in A) There are four main factors that effect resistance, these are: As temperature increases, the resistance of the wire increases as well. Some metals are better conductors than others, for example Nichrome has more resistance than copper. The thickness of the wire affects it as well because the thicker the wire the more resistance there is.   And the one I am testing- As the length of the wire increases, as does the resistance because there is further for the energy the travel so it looses energy along the way. In 1826 Georg Ohm discovered that ‘the current flowing through a metal wire is proportional to the potential difference across it’. In other words if you double the potential difference the current is also doubled. However this law is only obeyed when all the conditions stay constant. However the shorter the wire the more energy is converted into heat due to more atoms for the electrons to collide with. So the wire temperature increases which was one factor that Ohm did not take into consideration. A battery supplies voltage to the circuit between its terminals. Ideally the voltage should stay constant, however it does not, this is because the battery itself has resistance and acts like a resistor. This is called internal resistance. Prediction: I predict that as I increase the length of the wire the resistance will also increase, because as the current goes through the wire the electrons lose energy because they collide with the atoms of the metal and they lose the energy via heat loss. This causes there to be a decreases in the push force that move the electrons around the circuit. If the wire is longer there will be more collisions and so the electrons will lose even more energy thus losing the push force. If I double the voltage the current will also increase because voltage and current are both proportional. However as stated above in my research I shall not expect this to be exactly correct because not everything in my circuit is not remaining constant the temperature of the wire should increase. Equipment: Energy source (batteries) Ammeter   Volt Meter   Metal wire 5 wires Plan:   I will set up my equipment ensuring that the volt meter is parallel to the metal wire I will then insert the 30 cm long wire and measure the amps and volts Then I will take away 5 cm off the wire and read off the ammeter and volt meter   I will repeat this till I have a 5 cm piece of wire. Diagram: Ammeter Volt Meter Wires Metal wire Batteries Preliminary Results and Changes: Length (cm) Voltage (V) Amps (A) Resistance 30cm cm After doing my preliminary experiment I have decided to do the test every 3 cm so it will go 30cm, 27cm, 24cm, 21cm etc. Results Results table 1 Length (cm) Voltage (V) Amps (A) Resistance 30cm. Results Table 2 Length (cm) Voltage (V) Amps (A) Resistance 30cm Results table 3 Length (cm) Voltage (V) Amps (A) Resistance 30cm Average Result for resistance Length of wire (cm) Average Resistance Conclusion I can now conclude that the resistance increases as the voltage (and current) increases because energy is lost as the electrons go through the wire and collide with the atoms. Having looked at my results and graph I can also conclude that the resistance is directly proportional to the length of wire because my graph is fairly straight. Despite the fact that hardly any off my points are exactly on the line, they follow the line of best fit and are very close to it. This shows that the resistance increases as the length of the wire increases due to more atoms for the electrons to collide with (see prediction and research for further details). Gradient y1 – y2 Two points: This shows that my line of best fit goes up very gradually. The graph that I have drawn is very misleading because it looks as though the line goes up steeply; this is because my scale is very big. If I half the scale my line would appear to go up at half the steepness. Resistance per centimeter   Evaluation My results in my opinion are fairly reliable we have the odd result as with most experiments, however on the whole our results and graph show that the current is directly proportional to the voltage and that was our aim in the beginning. Our graph is reliable despite the fact that only two results actually touch the line (this could be due to back readings off or a fault in our method) because all of our results follow the line and are very close to it. Regardless of getting reliable results except a few anomalous results we could have improved our method by ensuring that we had the set amount of wire in between the clip, for example 30cm, because when you add the clips it takes of about 2 cm so we could all of the experiment with the wire 2cm longer. Also as stated above in my research temperature has to remain a constant, which it was not because the smaller the wire got heat was lost so the resistance would be higher so maybe our lower results are not as reliable as the higher ones. Abigail Male 1st February 2002 Show preview only The above preview is unformatted text This student written piece of work is one of many that can be found in our GCSE Electricity and Magnetism section. A piece of wire on the resistance. (2017, Oct 19).

IOS Development Using Watchkit Essay Example | Topics and Well Written Essays - 1500 words

IOS Development Using Watchkit - Essay Example From this paper it is clear that in the mobile platform, a large market share is held by the iPhone; this being the reason behind interest in learning about iPhone development. The process of development entails an outline of how to establish the hardware for the applications. Setting of the software requirements and the final system requirements is also part of the process. Apple Inc. has made it easier for people who want to become developers with them. All a person needs is an account charged $99 annually, a mac computer, Xcode platform and a coding experience, such as the Swift and Objective-C coding languages. A developer page is availed that allows for download of the latest software and SDKs. The page also enables a certification for creation of profiles and groups and one has is free to manage the account and report any difficulty or bugs faced.As the study highlights  the apple Inc. created a modern programming language called swift. It is specifically developed to be more precise and flexible that the Objective-C. Swift has LLVM (Low Level Virtual Machine) compiler framework that utilizes the objective-C runtime allowing C, C++, Swift code and Objective-C to run in a single program. The flexibility of Swift is attributed to its capacity to support widespread late binding, dynamic dispatch and extensible programming.  The Swift programming language has several features that indicate some similarities to the Objective-C, though are easier and more flexible.

The Best Recruitment for Choosing an IT Manager Essay

The Best Recruitment for Choosing an IT Manager - Essay Example With the help of this job description, the company would be able to outline the job specifications and trace out the most suitable candidate for the job. The company needs to chalk out the various responsibilities that the concerned person would have to execute on a daily basis thereby understanding exactly the necessary knowledge and the skill base that an ideal candidate should possess. As pointed out, the IT manager must have a sound knowledge about the latest 'information and communication technology' which is the most necessary and essential criteria for a candidate to be eligible for the position of an IT manager. The candidate must have a thorough knowledge about the technicalities that are essential in an environment where advanced IT processes such as 'Integrated Stimulator' form the chief operating system. The candidate must also have knowledge about medical science as this company provides a virtual network by which it offers a complete learning package, integrating the fo ur important components which are anatomy, text, simulation and video. So, without having a thorough understanding of the various processes in medical science, it is not possible for a candidate to work in this framework. ... The candidate must also have knowledge about medical science as this company provides a virtual network by which it offers a complete learning package, integrating the four important components which are anatomy, text, simulation and video. So, without having a thorough understanding of the various processes in medical science, it is not possible for a candidate to work in this framework. He should also have a thorough knowledge of the various medical tools that are being used today in the medical field. It is suggested that the company should look out for an experienced candidate who has been working in such a similar IT environment and is also quite familiar with the medical practices. The advertisement posted should be specific about the exact job specificat ions desired from a candidate. The language and the technique of writing the advertisement should have been more formal. This would have conveyed the urgency and the seriousness of the employer to find out the potential candidate for the position concerned. There is no need of unnecessarily stretching the advertisement and making it look cumbersome. A potential candidate might lose interest while reading the advertisement, if the person is in a hurry or is working at a higher managerial position in another company. This person may be looking for a prospective change in job and can be one of the desirable candidates for the position of IT manager. To attract the right candidate, which is the main objective of a proper recruitment strategy, it is absolutely necessary to post a precise, well written formal advertisement. It should be remembered that choosing a proper medium to communicate a job opening to a candidate is of utmost importance and secondly.

Operations management Essay Example | Topics and Well Written Essays - 250 words - 3

Operations management - Essay Example It will be situated next to the road, railway and airport terminals. The design of the warehouse will also consider variability factor. This implies that it will be segmented into different sections such as shipping, reception, and stock and returned stock areas so as to store all the products (Kumar 174). The segmentation of the warehouse into different sectors will play as significant role in storing all types of tea brands, qualities supplied by the company. In conclusion, these Vs will help it to create a risk-free environment and safety storage for products, it will enable the staff to keep inventory of all the stock (Cannella and Ciancimino 175). Through this, the company will win the confidence of the clients and emerge as the best alternative regardless of the stiff competition from established companies like Nescafe, Lipton and Twinings, that enjoy a dominant share of this lucrative tea business. Cannella, S. and Ciancimino E. ‘Up-to-date Supply Chain Management: the Coordinated.’ In Dangelmaier, W. et al. Advanced Manufacturing and Sustainable Logistics. Springer-Verlag Berlin Heidelberg, Germany. 2009.

Bilingual Education for Americans Research Paper

Bilingual Education for Americans - Research Paper Example In the United States, Bilingual education focuses on the learners of English. The United States Department of Education notes that a bilingual educational program is an education program for limited English proficient students (ed.gov/). It is this definition that has remained in the federal government but there are several areas where it has fallen out of favor. This is because such a definition more or less shows that the student needs or requires support in the English language for him or her to succeed academically. In almost all, if not in all the states, there is a general feeling by the groups pushing for bilingual education system that it does not help to have this idea and they also do not find a justification for such a definition. History has it that the earliest instance of bilingual education in the United States occurred with the immigrants from Poland who first permanently settled in an English speaking area of Virginia. At this time it was only the rights of the Engli sh people that were recognized. It was as a result of the need that the English had for the skills of the Poles that got similar rights to the Englishmen and managed to establish a bilingual school (Seidner, p.72). In this school, the subjects were taught in both Polish and English, and this continued in other places in one form or system or another. It expanded to Native Americas, the Dutch, the Czech, the Germans, French, Spanish and Norwegians in the century that followed. Several states developed laws to address this issue depending on the demands of the foreigners. There are groups that believe that a bilingual education should be necessary, even if temporarily so as not to discriminate against foreign-born students, or bring them up to speed. On the other hand, there those who claim that English should be the national language, and until every student is proficient in English, the fact that they have the ability to speak another language hinders their development in the Englis h language and slows down the overall process of learning in America. Although most initiatives against bilingual education have always had a majority lead when it comes to this issue, I hold the opinion that the world has become a global village. As such, I believe that a bilingual education should be mandatory for Americans, starting in Elementary school, through secondary school and even in the collegiate levels as the need may require. This position is highly based on the fact the number of immigrants whose children are at the age of attending school but speak very little or no English, are denied the benefits of being able to attend school at the appropriate age. In most cases there is usually a sort of remedial classes that they have to attend where they are taught only English before they get the opportunity to become part and parcel of the main school curriculum. In a system of Bilingual education, the necessity of such classes would not be fundamental and the children will be able to learn without any regard of the language that they speak at home or with which they grew up. This is because the curriculum would include their language too. The Advantages of Having a Bilingual Education System They hold the opinion that it does not help to keep non-English speaking children out school for them to master the English langu

Marketing of Services Term Paper Example | Topics and Well Written Essays - 1250 words

Marketing of Services - Term Paper Example Research has shown that the design of a services cape influences a customer’s expectation, choice, satisfaction and other behaviour. The four strategic roles service scopes are as follows: Package The service scape and other physical evidence wrap the service so that it conveys a clear message to the consumers of what is inside. It is just like packaging a tangible product. The physical setting of a service essentially does the same thing through the interaction of the complex stimuli. The service scape is essentially the outward appearance of an organisation and hence it is critical in forming the first impression of customer expectation. Facilitator The service scape can aid in the performances of the persons in the environment. The design of the services cape can enhance or inhibit the efficient flow of the activities in the service setting. Thus it makes it easier or harder for the employees and the customers to accomplish their respective goals. A well designed functional facility can make a customer experience pleasure while an inefficient and poor design can frustrate both the employees and the customers. Socializer The design of a service scape can help in the socialization of both the employees and the customers. ... Any changes in the physical environment can be used to signal reposition a firm or to target new market segment. Question 2 Global business environment has become highly competitive as several organizations within the global business environment are implementing unique business operation strategies in order to gain potential competitive advantages. Several service providing organizations always try to ensure high quality customer service in order to develop potential customer base. It is true that high engagement service providing organizations need not have to concern about the issues of customer loyalty. Now-a-days, consumers always demand effective customer service from the organizations against their money. Satisfied customers always intend to stick with the brand or the organization. The do not try to take the risk of switch over another brand. Several service engagement organizations used to focus on strong and effective customer relationship management practices in order to re tain its existing potential customer base. However, these organizations have to focus on developing new client base as the business environment in this world is becoming competitive and saturated. People are becoming loyal to particular brands due to high satisfaction from the offered services. Therefore, it is highly important for the organizations to attract the new customers who have never experienced about the services of other service providers. It is quite easy for an organization to gain customer loyalty of a new and inexperienced customer about different service. If the customer chose another brand then it will be difficult for that organization to attract the particular customers. High service engagement firms should not

Gaming Industry Mini-case homework Essay Example | Topics and Well Written Essays - 500 words

Gaming Industry Mini-case homework - Essay Example Customers will always be important to business but these buyers also have other alternatives to entertain themselves such as online casinos, internet, movies etch. Video games may be more engaging than the alternatives but the low switching cost makes the alternative viable. The alternatives to video games may be numerous but they are not as engaging as video games. The alternatives are also full of risk such as online casino whose legality are still doubtful making its potential users to be less attracted to it. Gaming industry is based on the ingenuity and talent of its game developers, programmers and other talents which is the backbone of the industry. To make sure that my talents are ahead of the game, I would always conduct training and workshops to ensure that they are ahead in the industry. Of course, it is a given that I should keep them happy for them to stay in the company. This could be done by offering them stocks, handsome pay and interesting work. I would not recommend an entry to the gaming industry because it is very risky and volatile. The industry also has very high learning curves that makes it very difficult for new players to catch up with the established players. The huge capital needed to start is also very discouraging and risky. Suppliers have very high power in the chain making the company vulnerable to suppliers. The existing players may also manipulate the price to become very low for the company not to survive its penetration

When I Whistle by Shusaku Endo - Commentary Essay

When I Whistle by Shusaku Endo - Commentary - Essay Example He represents the competitive, fast paced and ambitious generation of young people in the modern world. Eiichi wants to get to the top. The drive to succeed is so important in his life that he is disgusted by the fact that his father takes things lightly. He considers his father a failure and does not want to end like him. For him his father is like a no good mediocre â€Å"fish in the pond†. It is through the character of Eiich that Edno successfully introduces the theme of change in his novel. Eiichi believes that the people should go for the best and get to the top positions. Ozu is happy the way he is. Eiichi appears as a contrast to his father. Ozu belongs to the time when relationships were given importance. It is evident from his relationships with Flatfish and Aiko. With Eiichi, it is different. He forgets about Tahara until he meets him again. Tahara appears a contrast to Eiichi. He is more concerned about his patients as he saysâ€Å" Im not interested in anything but his illness". But for Eiichi what is important is not the health of the patient but the knowledge that he derives from each different. He has no respect for his patients. He tries the new drug on Aiko that has a negative effect on her. He is disgusted to see the element of honor in Tahara who is eventually kicked out of the dispensary for not obeying the orders. Eiichi is more ambitious and admires Dr. Li. He respects him more than his own father. He believes that Dr Li has something that makes him different from others and has made him a leader rather than his own father to whom he refers to as a â€Å"pusho ver†. This symbolizes the attitude of the modern generation towards their parents. Eiichi along with Dr. Uchida, Kurihara and Dr. Li represent the materialistic people of the modern world. Tahara is kicked out of the group because his morality has no place in the modern world. The lack of ethical and moral values of the modern

Marketing 4p assigment Essay Example for Free

Marketing 4p assigment Essay INTRODUCTION 1. 0 BACKGROUND OF THE ORGANIZATIONS: Backed by more than 20 years of experience in Japan, Sushi Zanmai possesses extensive expertise for raw materials selection. Base on the nature of Business is classified as Food Beverage industry. The purpose of their business is serves the best food and services to each customers. Genuine ingredients coupled with original recipes and original taste, they provide more than 100 assortments of sushi and 100 varieties of cooked food that are authentically Japanese. They now have 10 outlets in Malaysia which is at Sunway Pramid, One Utama, Garden Mall, Low Yat Plaza, Paradigm Mall, Fahrenheit 88 and 1 Month Kiara. They have their own wedsite for customers more easily to find out the most nearby location and know what is new on that month. The main selling product is sushi other that they also have sell noodles, rice set, desserts, and beverages. That sushi of colour plate starts from RM1. 80. 2. 0 THE PRODUCT OF SUSHI ZANMAI Sushi Zanmai is originated from Japan. They are offering the combination of tangible goods and services in their business. They provide traditional Japanese foods and services on their business. They business are on direct sell foods to customers. They have serves appetiser which the Japanese meal begins with a visual feast of chilled and warm appetisers, like: Salmon roe Japanese omelette Potato Mayonnaise Sushi Zanmai created own specialties featuring the freshest, handpicked ingredients provide a fresh, contemporary spin on much-loved favourites, exquisitely tailored to suit local taste preferences such as, Sanshoku Hana Salmon Caterpillar Roll Wasabillar Roll The traditional entree consists of expertly-sliced raw fish, shellfish or mollusks, complemented perfectly by the combination of wasabi and soy sauce, and often accompanied by pickled ginger, example Salmon sashimi Toro sashimi Maguro sashimi According to survey, most of the female prefer sushi salad that the reason Sushi Zanmai products include various types of Salad to let customers choose too. As you can see the three popular salad dishes are Sashimi Salad Salmon Salad Kaiso to Tofu Salad Rolled sushi in Japanese language is pronounces maki. It usually comprises of seafood which may or may not be raw, vinegared rice and paper-thin seaweed. For example, Salmon Maki Soft Shell Crab Maki Natto Maki Follow that, they do have Temaki. The â€Å"te† in Temaki means hand is Japanese language. The Temaki sushi is two- fold. It not only refers to a hand roll that is made entirely with the hand, without the traditional bamboo mat. The cone-shaped Temaki sushi is ofeten prepared as an appetizer. Soft Shell crab Temaki Ikura Temaki Unagi Temaki Other than that, noodles are also usually customers will order it. They have provide three types of noodles one is soba which is made from wheat flour, Udon made from wheat flour, Ramen made from Chinese wheat flour and served with a wide range of soup stocks such as soy-sauce base and salt base. Sansai Udon Niku Ramen Kakaiage soba Donburi a dishes consist of a deep bowl of rice topped off with chicken, beef or seafood cooked in a variety of styles and sauces. They have, Curry Rice Unadon Ebidon In beverages, they served many types of drinks like Green Tea, Calpis Smoothies, fine Japanese Sake, Soft Drinks, Japanese Plum Wine and others. Green Tea (unlimited refill) Ichigo Smoothies Choya Extreme A dessert to end the meals. It have multiple choice as well as, Macha Macha Parfait Itachoco Monaka Stawberry Parfait For the level of the product and services, Sushi Zanmai is selling the product which is categories in actual product. They have their own brand name, design, packaging that deliver the core benefit to customers. They are selling high quality level product that most of the ingredients are import from Japan such as Salmon, tuna, sea bream, Eel and etc. Besides, Sushi Zanmai are selling the shopping product goods which is one of the important consumer goods in market. There have few reason because of Sushi Zanmai’s product is belong to shopping product. Sushi Zanmai of products is consumers purchase and consume on a less frequent schedule compared to convenience products. Normally, they opened their business inside the shopping mall and which is high class and crowded shopping mall. They will do more selective when choosing distribution outlets to sell their products. However, customers are willing to spend more time locating their products since they are relatively more expensive than convenience products and because these may process additional psychological benefits for the purchaser, such as raising customers status level within their social group. 3. 0 THE PRICING STRATEGY THAT USED BY SUSHI ZANMAI Sushi Zanmai has successfully follows the price skimming strategy when setting the price of its products. The price skimming strategy allows Sushi Zanmai to charge a price that is above the competition, but also promote frequent sales to lower the price below them. Different groups of customers are willing to pay different prices for the same product. Sushi Zanmai can sell â€Å"The Extreme† to the customers who will pay the higher price to be the first to buy and also to the bargain hunters. Finally, this strategy will emphasize the product and service quality. Sushi Zanmai sets a high initial price for its products to send a signal to customers that its products are quality and the service is excellent. Next, Sushi Zanmai also using price line and price bundle as the pricing strategies. Product Line Pricing They have selling same product of food but different categories. Every guest has different taste and love different type of cruise that the reason Sushi Zanmai has to classify as well. Certainly, different materiel of food sure is different price charging. For example: Sushi Name Ingredients Price Inari Sakura Shiitake fish floss RM3. 80 Kaki Fry Roll Friend oyster sushi roll topped with mayonnaise RM9. 80 Dragon Roll Fried prawn sushi roll topped with avocado RM12. 80 Rice Name Ingredients Price Ebidon Deep fried prawn with egg on rice RM8. 80 Chiken Katsu Curry Chicken cutlet and rice with curry sauce RM10. 80 Unadon Roasted eel on rice RM15. 80 Noodles Name Ingredients Price Tsukimi Udon or ramen noddles with egg RM6. 80 Sansai Udon or soba noodle with vegetables RM8. 80 Curry Udon or ramen noodle with chicken curry RM10. 80 Product Bundle Pricing Sushi Zanmai has offering set promotion to attract more guests to purchase their products. Set promotion is type of bundle strategy. It can let guests feel the price is lower or cheaper but just have in certain and limited lime for it, like: Chicken Keraage Don and ice lemon tea for only RM7. 90 As manager will be considered in a few points when setting the bundle pricing strategy: Customer demands, sort out which is the product of the guests prefer or like it. Customers always pursue cheaper price, Target profit; make sure will reach the target. 4. 0 PLACE OF SUSHI ZANMAI Location is very important to those in Food and Beverage industry, as the product they sell is shopping product, the customers should not be able to take far complications to reach their shop. Normally, Sushi Zanmai chooses to open their new outlet inside the shopping mall that those people visit regularly. Below as those outlets of Sushi Zanmai in Malaysia : †¢SUSHI ZANMAI, SUNWAY PIRAMID †¢SUSHI ZANMAI, LOW YAT PLAZA †¢SUSHI ZANMAI, 1 UTAMA †¢SUSHI ZANMAI, THE GARDENS MALL †¢SUSHI ZANMAI, FAHRENHEIT 88 †¢SUSHI ZANMAI, 1 M ONT’KIARA †¢SUSHI ZANMAI, PARADIGM MALL One of the outlets of Sushi Zanmai in K. L Distribution Sushi Zanmai’s distribution channel is a direct channel as they are selling their product directly to the customers. Their distribution channel is considered as a direct channel, and it is the best suitable method to do for selling sushi, udon and beverage to the customers. As Sushi Zanmai are being in food and beverage industry, the best way to serve their customers is by serving them nicely and directly. The shopkeepers who are preparing meal in front of the customers 5. 0 PROMOTION OF SUSHI ZANMAI Sushi Zanmai are using promotion methods which are Advertising and Sales Promotion. For advertising promotion purpose, they have created a web page over the internet that those people could get the information which about them with visiting their web page. Other than that, for the reasons of nowadays most of the people are having an account on facebook, so that they have created a facebook web page to be distributed among the facebook page. The facebook users or customers might do a feedback or recommendations that about them through their facebook page. Web page of Sushi Zanmai Sales promotional sets will be made to promote their products to let the customers try and enjoy their product and to create strong customer relationships by promoting personally and friendly service. Their popular promotional methods are: Have 50 % discounts for only these 4 types of items. The duration of this promotion is just for one week. Sushi Zanmai have did the promotion that shown as above. The customers will get a Chicken Karaage Don for only RM 6. 80 after finish the steps that set by them. Free RM 20 Sushi Zanmai voucher for those customers whom spend RM100 or above in any of their outlets. The duration for this voucher is just for one month. 6. 0 Improvements in 4p’strategies of Sushi Zanmai Product Sushi Zanmai should activate the strategy of product development and come up with new products from time to time as it is important to maintain the preference of the customers with the new developed products. For example, the organization can come up with new type of rice and new sushi flavour or developing new menu items in single orders such as Udon and etc. Place Shopping mall actually is a not bad idea for open a restaurant but also need to careful about the visibility. A restaurant that is located on a crowded place has high visibility. Conversely, a restaurant nestled on a not crowded place will always battle a disadvantage simply based on its location. Pricing Sushi Zanmai should be try not setting too higher price to attract more other guests purchase your product and also can earn more profit. Promotion Sushi Zanmai can also be improved by creating more value sets that prompts the customers to try out the new products made for specific period as a special promotion during particular season such as Valentine’ Day and Merry Christmas or holiday season value sets for example Advertising on TV Sushi Zanmai shoud has advertising on TV. Television is the most powerful advertising medium available. The largest corporations around the world use it to build their brands, bring customers, add credibility, and grow their businesses. Delivery Services Add delivery services. It can help a company gaining popularity and becoming more available. 7. 0 Conclusion In conclusion, i would like conclude by listing the 4p’strategies that regarding of is price, place, promotion and product. They are offering the combination of tangible goods and services in their business. In setting pricing the Sushi Zanmai is using price skimming for their products. For the place and distribution, The Sushi Zanmai is use direct as their channel. Moreover, the Therefore, Sushi Zanmai should improve its product quality and take considered action in order to improve the sales as expected.

Victorian author Essay Example for Free

Victorian author Essay Victorian authors and painters give a good representation of what life must have been like for the people of that period. John Ritchie’s painting, â€Å"A Summer’s Day in Hyde Park†, for instance shows that, while people in the Victorian era might have been overly-dressed, they certainly were not without their fair share of amusement. In the bottom, right hand corner of the painting, a gentleman can be seen rowing a lady (perhaps his wife) and a young girl (perhaps his daughter), home in a boat. The entire family has come to the beach for an outing a site less often seen in modern days, where families (and especially elderly relatives) tend to be a bit sedentary. Meanwhile, in the background of the picture, A gentleman can be seen riding by in a carriage, tipping his hat to his neighbors as he passes. The writing of Victorian authors suggests that the fact that a man own’s a carriage means he has some wealth. In William Thackeray’s Vanity Fair, for instance, Becky Sharp comments that the â€Å"acquirement of that dignified deportment and carriage† is â€Å"requisite for every young lady of fashion. † (Thackaray, 2005, p. 1) In the left hand corner of the painting, an officer in a red coat can be seen resting wearily on the bench next to a lady who seems to be paying no attention to him at all. The lady next to her may be giving the officer some attention, but it is impossible to tell, because her face has no detail. It is merely a blotch of paint. Still, because her head is tilted upward, it seems reasonable to believe she might be speaking to the officer. Indeed, if there is any truth to how Victorian authors portray the importance of soldiers to young women, then the viewer can be fairly certain that she is attending to the officer. For in William Thackeray’s Vanity Fair, officers are some of the most ardent admirers of the main characters, Miss Sharp and Miss Amelia. Although there is much merriment depicted in Ritchie’s painting, there is something disturbing about the way he treats the subject of children. Many of them are in the painting, but only one seems to be looked after. Her grandparents, rather than her parents seem to be doing the watching. The reason for this can be seen in Victorian author Charlotte Bronte’s writing, which suggests that children in the Victorian era were sometimes looked upon as inferior to adults. In Jane Eyre, Bronte describes a situation in which Jane’s Aunt says to her the following: Jane, I dont like cavillers or questioners; besides, there is something truly forbidding in a child taking up her elders in that manner. Be seated somewhere; and until you can speak pleasantly, remain silent. (Bronte, 2005, p. 1) It is no wonder, then, that Ritchie’s adults pay such little attention to their children. In conclusion, Victorian painters and authors show that the Victorian era was one of leisure for wealthy adults, but not, perhaps, the most nurturing environment for children. Works Cited Bronte, Charlotte. Jane Eyre. 2005. Classic Reader. 19 July 2007. http://www. classicreader. com/read. php/bookid. 31/sec. 1/ Thackaray, William. Vanity Fair. 2005. Classic Reader. 19 July 2007. http://www. classicreader. com/read. php/bookid. 91/sec. 2/kw. acquirement+of+that+dignified/

Ac Power Logger Using Mcp39009 Engineering Essay

Ac Power Logger Using Mcp39009 Engineering Essay In this project we are going to record power consumption using MCP3909 by using AVR 5A microcontroller. This MCP 3909 is an energy metering IC with SPI interface and active power pulse output. Where the MCP3909 used in two different phases that can be operated at a time like 1.Output through active pulse power and 2. Waveform obtained as output through SPI interface. For the output real pulse power, the device gives frequency output proportional to instantaneous power. For the waveform output, it gathers data from the current and voltage channel and both are 16 bit second order delta sigma ADC . Through out this project time I learnt to do coding in C programming to get pulse output that shows the consumption of power. This program is developed to use with microcontroller Easy AVR 5A type of AT Mega 16. This program is executed by using AVR Studio by running it through AVR Flash and the output pulse wave form is gathered at AT Mega 16 board and we can check using oscilloscope. Here to have connection between AVR board AT Mega 16 and CPU we use USB which acts like supply and we use USART to transfer data between each other. As in my project I have MCP3909 as separate board I should give correct connection between MCP 3909 and AT Mega 16 correct supply connections. As I am doing project in embedded microcontroller with C programming and output I get is pulse waveform so for better performance and other reasons I took Easy AVR AT Mega 16 development board with 8 KHz frequency. My project is AC power logger using MCP3909 where MCP 3909 is an energy metering IC with SPI interface and active power pulse output. Where the MCP3909 used in two different methods where they can be operated at a time like 1.Output pulse power and 2. Waveform we get as output through SPI interface. For the active real power pulse output, the device gives output frequency which is proportional to instantaneous power. For the waveform output, it gathers data from the current and voltage channel and both are 16 bit second order delta sigma ADC which over samples input signal at frequency equal to MCLK/4 and allows large range of input signals. For channel 0, the increase in the current at channel 0 is done through programmable gain amplifier increase.. As I get pulse count at output when we use oscilloscope to get exact count and good performance I use Easy AVR 5A AT Mega 16 microcontroller. This AT Mega 16 microcontroller allows assembly language and C language programming but I did coding for counting the power consumption using MCP3909 in C language. In this first I gave USB and USART connection between CPU and AT Mega 16 board, here I gave MCP3909 connection with AT Mega 16 and gave current and voltage channel input to MC3909 and I get pulse output this is with out SPI pin not in use but still they should be connected. But for SPI connection program I will give voltage and current with 50hz frequency and take output voltage and current values from the hyper terminal connection and calculate the output values. In this whole project time I began to understand the SPI and USART connection to write program in C language and also understood how the MCP3909 works . The energy meter is a device which is used for electrical measuring, it is used to record electrical energy consumed in specific period of time in terms units Every house, small factory, business establishments, shops, offices etc need at minimum one energy meter to register power consumption. The one who supplies electricity raises bills based on readings shown in energy meter. The one who produces electricity sale the electricity to the electricity boards and board will sale this to costumer. So the data generated by the energy meter is the base to raise bill by the power supplier. This energy meter products are available in single and three phases at different current ratings as per customer requirements. This energy meters are basically electrical and mechanical components. The design of energy meter depends upon which rating of voltage and current meter has to work. In this project the energy metering IC that we take is MCP3909 which is used for supporting IEC 62053 which is standard international meter. It gets the output frequency which is proportional to real power as input so as to access the ADC channel and output of multiplier data. The delta sigma which is 16bit ADC is used to allow large range of currents using the design. The exact or appropriate energy IC is available in the industry which is highly reliable and which has 24-lead SSOP output pin. In this functional as we can see it shows ch0 and ch1 channels where these are inputs and given from the current and voltage transformers .The gains g0 and g1 are also given as input and the dual functionality pin is connected for SPI connections and also for f0, f1,f2. The outputs we take from the active power DTF conversion as HFout and other outputs Fout0 and Fout1 are obtained from stepper motor output drive for active power. The above one is the general block diagram of MCP3909, but the diagram that I use here shows the diagram with the connections , this shows how the MCP 3909 is internally connected to oscillators ,jumpers and for the output using its 24pins. It shows that for the jumper j7 it connects internally to fout 0/1, hfout. For the jumper j2 it shows the connections to spi communications connected and the jumper j6 to ch0 and ch1 channels. The digital voltage acts as digital circurity in MCP3909 where it is the one where we get digital power supply. This pin requires appropriate by pass capacitors and should be maintained to 5V. In both the input channel levels this pin acts as HPF and where it controls the flow of signals. The logic 1 will activate both the filters for removing the DC offset from the system and this logic 0 will disable both the filters so due to this they allow DC voltage. This is analog circuit pin which is used to give analog power supply with in MCP 3909 an this pin requires exact bypass capacitor which gives ramp signal with rising and falling edges and it must be maintained at 5V. This pins are used for current measurements and where they initially take analog voltage as input and convert to current and this will have PGA for small input signal. The linear and the region where it characteristics of this channel are dependent on PGA gain. It relates to maximum voltage of 470Mv/G and the voltage range changes from 1 to 6 V with respect to Agnd. . This pins are used for voltage measurement and this pins initially take difference analog voltage input. The linear and specific behaviour of this voltage channel is maximum at 660mV with absolute voltage 1V Here for the internal 2.4V reference the output is the reference in/out and with temperature coefficient of 15ppm/c. Here by applying the voltage to this pin from the specified range we can use external reference and these reference in/out pin uses bypass capacitor to AGND even when using internal reference.. This is the analog ground where all the ADC,PGA,POR and band gap reference are connected to ground and this is analog circuit. To have noise signal to be cancelled this pin should be connected to same ground as Dgnd with star connection. This is the normal ground connection where SINC filters, multipliers, HPF, LPF, digital to frequency convertor and oscillator; this is used as internal circuit connection. To have accurate and noise to be cancelled this digital ground should be grounded same as analog ground with star connection. The output pins that are connected to MCP3909 are frequency outputs that give us real power and the signal that we get when connected to oscilloscope is pulse where this pulse period is directly proportional to power and Fc constant. This pins helps us to activate the electro mechanical counters and also two phase stepper motor. The high frequency output supplies instantaneous real power information and out put is periodic pulse and where it is directly proportional to measured l power and HFC constant obtained by F0,F1,F2 logic gates and the output that obtained is the fastest output frequency. These oscillators will provide sine waveform with clock source and these oscillators are mainly used to give clock signal for master in the device. The clock frequency is given as 3.57MHz and this clock frequency value should range from 1to 4 MHz with out any error. In this to convert the signal from digital domain which has wide dynamic range we use PGA to do this function which is common thing done in wireless communication. To load normally input signal from analog to digital we need to increase the amplitude so to do this we use PGA. High resolution sigma to delta ADCs all have Programmable Gain Amplifier at input to the sigma to delta modulator is given as shown below The PGA on the ADs chip offer eight input ranges to ADC with 2.5 voltage reference, the eight reference voltages are 2.56V,1.28V,640mv,160mv,40mv.if reference voltage is doubled to 5v then full scale input for each range is halved. So the actual signal range for any PGA settings are given as, VREF*1.024/2(7-RN) where RN value is 111 when ref voltage is 2.5v The main use of PGA is that the noise in terms of micro voltage decreases when the gain increased. In effect the input signal is gained up but the noise is not gained up, so there is an improvement in signal to noise ratio. The pins reference sampling rate is given at 524 khz and capacitor value is fixed so there is no variation in reference current and any gain error that has due to resistance on reference input is also fixed. If reference current changes on sigma to delta the gain error that occurs also varies and the benefit of using ADC will be lost. The PGA for the ADC offers benefits of high resolution and low noise at high gain , but without the disadvantages of requiring regular calibration every time the range is changed. A buffered input and new reference sampling scheme avoid many of the problems associated with previous multirange ADC. All the delta sigma ADCs , registers, filters, multipliers are controlled by reset of master clear and this pin is also used to change their serial interface and behaviour or functionality. The logic 0 controls the ADC and registers in reset condition. The only one that uses power during master clear is oscillator. The microcontroller manufactures produce other design products so that they are related to their own design and in this we require another output pin. This condition or situation is correct for small design products where they have eight pins are fewer than that. This microcontroller has two output pins, one input pin , RAM flash and ADC module .For programming the microcontroller mode you need MCLR and supply pins(VCC and GND). To run or make the coding active we need mainly power supply and MCLR,microcontroller must see the difference between normal and program mode. Here the MCLR takes 12V to enter program mode and it takes external reset or input pin to enter into normal mode. The microcontroller design uses one pin for analog input and has other three outputs and it also requires an additional output, so for this reason the circuit uses MCLR pin as output. To make MCLR pin to act as output the microcontroller uses weak pull-ups. Analog to Digital Conversion (ADC) is the process of sampling continuous analog signal and converting the signal into quantitized representation of signal in digital domain and all the ADC architectures will convert analog signal into digital representation. The conventional ADC process takes input signal x(t) into sequence of digital codes x(n) at sampling rate fs=1/t, where T represents sampling interval this sampling function is equivalent to modulating input signal by set of carrier signals with frequencies 0,fs,2fs †¦. The sample signal is expressed as summation of original signal component and frequency, here the frequency modulated by integer multiple of sampling frequency. The signal component at frequency in input signal cannot be properly sampled and such signals get folded in base band signal creating in this non-linear is referred to as aliasing . Anti-aliasing filters are therefore required to prevent aliasing. Many A/D converters have successive or continuous approximation register and flash converters operate at nyquist rate fn. These converters sample analog signal at sample frequency equal to twice maximum frequency of input signal. Sigma Delta AD converters do not digitize the incoming analog signal into digital sample of n-bit precision at nyquist rate, sigma delta ADC samples the analog signal by an sample ratio N resulting Fn One of the advantages of sigma-delta ADC over nyquist ADC is the relaxation of the requirements for the anti aliasing filter. The requirement of anti-aliasing filter for nyquist rate ADC require sharp pass band (fs) to stop band (fn) The sigma delta ADC contains simple analog circuits like voltage reference, comparator, integrator,summing circuit and switch and in this the digital circuit consists of digital signal processing which acts as filter. Now consider technique of oversampling in frequency domain when converting to dc signal it has quantization error up to  ½ LSB and this sampled data has quantization noise. If ADC is less than perfect or exact value its noise is greater than quantization noise so due to this its resolution will be small than n bits and its actual resolution is given by The sampling rate is chosen as Kfs then quantization noise is q/sqrt12 due to this noise will spread at bandwidth dc to Kfs/2 , So to reduce noise we use digital low pass filter at output with out disturbing the wanted signal. K is referred as sampling ratio and this sampling relaxes requirement on the analog antialiasing filter. Here the data rate is less than the sampling rate and to satisfy nyquist criteria and this is done by using low pass filter to reduce the bandwidth, this process can be done by giving Mth result to output with neglecting the remainder and this process is known as decimation by factor M. This M can have any value such that output data rate is greater than twice the bandwidth. If we use oversampling to improve resolution then the oversampling must be factor of 22N to get N bit resolution increase, the sigma delta converters does not require any large oversampling because it limits to pass band signal and shapes the quantization noise to fall outside the pass band as shown in figure. Here we have 1-bit comparator (ADC) when we use it integrator output, then sum the input voltage with output of 1-bit DAC which we get from ADC output.. The digital low pass filter and decimator at digital output are added to get sigma delta ADC and after this signal is given to modulator where it modifies quantization noise by making it to lie above pass band filter ,so due to this the ENOB is larger than the expected sampling ratio. The sigma delta ADC operation is like the input given as Vin which is dc and the integrator consistently move up and down at node A and here output of comparator is given to 1-bit DAC and summing point at node B. This negative feedback value will force the average dc voltage at node B to be equal to Vin. The output voltage from the DAC is controlled in the 1-bit data stream of the comparator output. After that when the input signal rises at Vref, the number of ones at the serial bit stream also increase and due to this there is decrease in zeroes and in the same way as the signal of Vref goes negative the serial bit stream at one decrease and at zero it increases. Here it shows that average value at voltage as input is in serial bit stream which comes from comparator and decimator and filter allow stream and give output. The data from the 1-bit ADC is not worth full when the given input value is single sample interval, so when we have more number of samples that are averaged will provide correct value. The sigma delta can not give detailed values in the time domain because of the single bit data output, so when the single input is near positive side it shows more ones than zero and in the same way when the input signal is near to negative it shows more number of zeroes than ones and if it is in midscale then it shows equal number of zeroes and ones. The below figure shows the output of integrator for two conditions where the first one is for input zero near the midscale so decode them pass output samples through low pass filter that averages every four samples this shows the bipolar zero. So from this we can say that if more number of samples are averaged more dynamic range is obtained. The sigma delta ADC can also be seen as synchronous voltage to frequency converter with the counter. If the number of ones in the output data stream is counted from the samples then the counter output will give digital value of output, this method applies only when have dc or for slow changing input signal. The 2N clock cycles are counted to achieve N-bit resolution and there by for getting effective sampling rate. Here noise shaping is explained in frequency domain by using sigma delta modulator. In this the integrator which is present in the modulator represents an analog low pass filter with transfer function H(f)=1/f and this transfer function shows that the amplitude not directly proportional to frequency. The one bit quantize gives quantization noise Q and it is given to output sum block. If we have input signal X and output signal Y the value that comes out of summing point is X-Y and after that it is multiplied by the transfer function and this is given as, From the equation if we see that if f=0 the output Y reaches X with no noise , and at high frequency the amplitude of the signal reaches zero and noise value reaches Q. So due to this the analog filter has signal effect on low pass and high pass effect on noise Q. This filter does noise shaping at given frequency in delta sigma model and higher order filter gives more attenuation in sigma delta modulators but some precautions should be taken. We get good quantization noise and best ENOB for given sample when we have more integrator and summing points in sigma delta modulator. This figure is giving the relationship between order of sigma delta modulator and oversampling amount to reach SNR. If oversampling is taken 60 then the second order capable of giving SNR of 80db and also gives ENOB value as 13 and in this we have filter to reduce noise and decimator to decide degree. This carries 13 bit outside but if you want to use additional bits, these added bits that carry signals has no useful value and buried in quantization noise unless the post filtering is used. The resolution can be increased from the 1-bit system by increasing the oversampling ratio or by higher order modulator. In the other method for the waveform output we give current and voltage as input which are 16bit and then given to second order sigma delta ADC where it oversamples input at frequency equal to MCLK/4 and with this it allows for wide range of input signals. The input current channel (channel 0) usable range is increased with the programmable gain amplifier and this is linked with block diagram of MCP3909 and gives in detail of its signal processing blocks. To cancel the system offset on both the channels we use to high pass filter and from output of filter we get voltage and current, so when calculating power we should not get any offset. As this signals are not having DC offset so the averaging technique is used to give active power output. The power signal at we get after filtering is active power output it is DC component and for averaging technique use sine and non-sine waveform after this the ADC takes real power to give output pulse where the frequency is directly proportional to real power. The frequency present at FOUT 0, FOUT1 outputs are used to drive counters and stepper motor which shows power consumed. Every pulse from F0, F1, F2 settings are used to give fixed amount of energy , the HFOUT has less integration and high frequency to represent power signal and due to less time it helps the user to get values fastly under steady condition. . For the current and voltage transducers the MCP3909 analog inputs are connected and each pin has specifications like it should pass from 5kV to 500V contact charge. The differential input is given for both the channels to reduce noise and absolute voltage should be kept at 1V related to AGND so this can do error measurement. The common mode signal is taken to respect both last condition and input voltage difference range and for good common mode ration to should be referred to ground. The current channel has PGA gain to measure small signal with out other signal. The maximum differential voltage we have at channel0 is 470mV/Gain. The maximum voltage fro channel1 is 660mV. For channel 0 gain selection is given as, This MCP3909 has internally POR to check supply voltage AVdd and this check when the systems power is on or off. This POR has built in hysteresis and timer to check potential ripple and noise on power supply. For this the threshold voltage is typically set to 4V. The MCP3909 is kept in reset state if the supply voltage falls less than threshold voltage and hysteresis value is 200mV to prevent glitches. Once the power is on the internal timer stop sending the pulse with MCLK=3.58MHz there by preventing potential metastability. For calculating the active power the MCP3909 use digital filter which is first order IIR filter where we can extract real power (DC component) from the power signal. Since the input power signal has harmonic content. We get ripples from the filter output at line of frequency when the filter is not ideal. To reduce the noise for line frequency at 50Hz we use cut off frequency as input clock (MCLK=3.58 MHz). The rejection of frequency component will be more than 20db. In this at the frequency converter the output of filter is stored and then it is helpful to compare threshold for Fout0/1 and HFout and each time threshold is crossed we get pulse. The Fout0/1 require more energy to get output pulse than HFout , like integration period and as this acts as filter the output ripple or noise is minimum. The threshold or transfer function of HFout and Fout0/1 are different to each other. The threshold energy or transfer function are different to each other , the Fout0/1 output frequencies are quite low in order to allow integration. In this synchronous serial transmission clock is shared between sender and receiver or the sender gives timing signal so that the receiver knows when to read next bit of data. In this serial transmission if we do not have data to send then fill character is sent instead of data so to keep transmission continually, these synchronous communication is efficient because in these we have only data transmission between sender and receiver.. for example the synchronous transmission is used between printer and fixed device where data is sent in one set of wire and clock is sent in different wire. This RS 232 is asynchronous serial communication method which is used for computers and others, it is called as asynchronous because there is no synchronizing clock present like which is in SPI where it is serial protocol, the serial protocol is such that it automatically synchronize itself. We can use RS 232 to easily create data link between boards and standard PC, you can makes data loggers that read analog value from ADC and give it to PC this is done by writing program that shows data with using graphs. In serial communication the byte is sent or transmitted one bit at time but in parallel communication the whole data like byte (8 bit) transmitted at a time. So for that we use parallel communication to send data in shorten distance like between graphic card and CPU and these parallel can have say many wires as possible , but serial communication uses one wire to transfer data so it is used for long distance. In series the logic level changes with the bit being transmitted (0 or 1) and to know which is start bit and end bit in byte we need to add synchronize line and note the value of data line when the clock line is high but this is the way the serial buses like SPI work . UART is not having clock because it is asynchronous but start bit and stop bit are used to synchronize the incoming data. When the word is in transmission start bit is added at start of each word and this tells the receiver that data is read to sent and forces the receiver clock to be synchronous with clock of transmitter. These two must not have same frequency drift but can have same clock. After the start bit is sent each bit in word are given least significant bit (LSB) and each bit from transmitter is sent with same time and receiver is in half way to check that bit is one or zero. The sender will not know when receiver looks at the bits but sender knows when the clock says to begin to send next bit of word. When the complete data word is sent the transmitter adds parity bit and at the receiver uses this parity bit for error checking and at last the one stop bit is sent by the transmitter, if the receiver does not receive the stop bit when it is supposed to be the UART thinks the entire word to be garbled and reports framing error to host when data word is read. This framing error occurs because the sender and receiver clocks are not running at same speed. Whether the data is sent or not the UART automatically discard start, stop and parity bit and if another word is coming the start bit for new word comes as soon as the stop bit for existing word been sent RS 232 In this it has two data line like RX and TX , where TX is the wire where data is sent out to other device and RX is the line in which other device put data it needs to send. We know that high = 5v and low =0v for MCU boards and this RS 232 has high=12v and low=-12v. So to make RS 232 to interface with MCU which understands 0 to 5 volts we use MAX232. As RS232 has no clock line for synchronization perfect timing is needed so transmissions are carried out in certain speed which is bits per second and number of bits transmitted per second is know as baud rate. Some standard rates are 1200, 2400, 4800, 9600, 19200, etc. RS 232 Level conversion As seen above the RS232 signals differ from signals in MCU, this level converter will convert RS 232 signals from -12 to 12 volts from PC to signal 0 to 5 volts to fed to MCU. It is good to check the operation so we use converter to see its working nature, so for this we need Hyper-terminal windows software which is used to open COM port and to send and receive textual data. For testing we need to connect output RX/TX together so data written to COM ports to enter our circuit and converted to MCU board signal level. After this understand the USART of AVR Microcontroller and write code to activate USART to send and receive data, like other microcontrollers AVR also has main hardware for serial communication this is called USART. In this USART hardware you need to write data to one of registers. Clock generation. This generator generates the base clock for transmitter and receiver, this USART supports four modes of clock operation 1. Normal Asynchronous, 2. Double speed asynchronous, 3. Master synchronous and 4.slave synchronous mode. The UMSEL bit in the UCSRC (control and status register) is the one that selects between synchronous and asynchronous operation. Double speed(asynchronous mode) is controlled by U2X found in UCSRA register. When UMSEL=1 the data direction register for the XCK controls weather the clock source is internal (master mode) or external (slave mode) and this is shown in block diagram Txclk- transmitter clock(internal signal) Rxclk receiver clock(internal signal) Xcki used for synchronous slave operation Xcko used for synchronous master operation Fcso- system clock Baud rate generator The USART Baud rate register and down counter are connected as programmable prescaler or baud rate generator. The down counter which is running at the system clock(fosc) is loaded with UBRR value each time the counter has counted down to zero and clock is generated each time counter reaches zero and the clock generated is the baud rate generator clock output = fosc/(UBRR+1). The transmitter divides the baud rate generator clock output by 2,8.16 depending on the mode and this baud rate generator is directly used by receiver clock and data recovery units. The baud rate generator equations are given as, Operating mode Calculating baud rate Calculating UBRRvalue Asynchronous normal mode Baud= fosc/(UBRR+1)16 UBRR= fosc/16baud   1 Asynchronous double speed mode Baud= fosc/(UBRR+1)8 UBRR= fosc/8baud   1 Synchronous master mode Baud= fosc/(UBRR+1)2 UBRR= fosc/2baud   1 External clock The synchronous mode operation is done by using external clock and external clock input from XCK is sampled by synchronous register to reduce change in stability and the output from synchronous register must pass through edge detector before it is used by transmitter and receiver. This process includes two CPU clock period delay and its frequency is given as FXCK USART of AVR The USART of AVR is connected to CPU by these six registers UDR- USART Data Register: basically this is not one but two register , when you read it data is stored in receiver buffer and when you write it gives to transmitter buffer. UCSRA: USART Control and Status Register: as it name says it stores some status about USART and there are some of this kind like UCSRB and UCSRC. UBRRH and UBRRL: This is USART baud rate register, it i s16 bit wide so UBRRH is high byte and UBRRL is low byte . To write programs with using USART you need to study about each register, the seen behind using USART is same with other internal peripheral. now we will describe each registers clearly This bit is set when USART completed receiving byte from host and program should read from UDR and this flag bit is set when unread data is present in receiver buffer and gets cleared when receiver buffer is empty. If the receiver is disabled, the receiver buffer is flushed and the RXC will completely zero. Bit 6- TXC: transmit complete This bit is set 1 when USART has completed transmitting byte to host and program can write new data to USART through UDR. The transmit flag bit is cleared automatically when TXC interrupt is executed. Bit 5 UDRE USART Data Register Empty The UDRE flag first tells us that the transmit buffer (UDR) is ready to

Prejudice- Right or Wrong? :: Free Essay Writer

Prejudice- Right or Wrong? Prejudice and racism are two major issues that many people have to deal with in their lifetime. It can effect many different people in many different ways. Various thoughts and feelings are shown in the novel â€Å"To Kill A Mockingbird† by Harper Lee, which shows a small but a very racist town towards coloured people. In the book they convict a black, Tom Robinson, of doing something we know he didn’t do but this was down to a white jury. The book shows and puts across the true way in which the world works. It shows real life situations that any of us could be in, for instance the Tom Robinson case. Many of the characters are realistic in the way they react to Atticus supporting the blacks and the way they discriminate them as many people, even today, have done the same. The characters Jem and Scout, put forward the child’s point of view. This view, however is still quite bigoted. The reason being is that they come from a background who have lived with a black and have never categorized them in any way. So they believe, due to Atticus fighting the case, that Tom Robinson is innocent and also try to take it into their own hands, by following Atticus down to the jail house one night for example, which not all people would do as everyone has their own opinion but this is a very good point in the book to show the way in which people react and live with the situation. Racism has been a steady problem all through time. One of the most troublesome areas of racism is in places of education. Finding a cure for this would be a major step towards ending racism in general. No one has ever thought of a solution yet, so racism will be as strong for as long as there isn't one. For example, In the 1960's, the governor of Alabama, George Wallace, was a militant supporter of segregation. In 1963 two blacks, Vivian Jones and James Hood, sought admission to the traditionally segregated University of Alabama. According to legislation at the time, they had every right to go there; but since the governor was so anti-black and pro segregation, he didn't like it one bit. As the two black students prepared to enter the college, George Wallace stood in the doorway blocking their way, addressing the need for segregation. He refused to move, so the national guard was called in to restore order and admit Jones and Hood to the University of Alabama. This was an important moment in black

Scops: A Living History :: English Literature Dictionary Essays

Scops: A Living History A scop is defined by the Oxford English Dictionary as "an Old English poet or minstrel." However, scops were simply so much more than that to the medieval world. They were the only means of entertainment for the people of the time. There was no television or Internet to escape to, and books were not readily available. Most medieval people in the eighth through twelfth centuries could not read or write,so the scops would tell amusing stories or tales of heroic deeds to the music of their harps. The stories would be chanted, giving great honor to those mentioned in the oral recitations, and the scop's song also provided a memory of the culture for those who would come after. According to Kemp Malone, â€Å"At an early date Germanic kings began to keep professional poets.† (p.75) These scops would travel the kingdom, telling their stories and singing their songs. They would have a harp or later a lute; these were the tools of their trade. Creating worlds and places many Anglo- Saxons never saw because few people ever left the place they were born, scops were important fixtures to the medieval world. The scops opened up the outside world to medieval people and engaged the imagination too. In Beowulf, scops are mentioned in recounting Beowulf’s deeds and amusing the men in the mead- halls. Like courtly fools, they would make their audience laugh. However, unlike the fools or court jesters, a scop was not there merely to entertain. They were a living history of the times and places of the past and present. Their ability to memorize many lines of poetry or stories has kept them alive throughout the ages so that we still have them today. The stories were sometimes embellished and altered to be more interesting to the listeners. For example, in Beowulf, there is the story of our hero fighting sea monsters as he swims across an ocean and spending seven days and night in the cold sea. â€Å"The Wanderer† is a tale that mostly likely would have been recited by a scop. The stories that the scops would tell often were elegies for the heroic dead.

Fraud, Waste and Abuse Research Project Essay -- Government Business A

Fraud, Waste and Abuse Research Project Combating fraud in the private sector is a difficult task. Trying to combat fraud in the public sector is daunting. In 1999 15.7% of the American workforce were employed by a government entity (federal, state, and local).[1] Mirroring society, government will have its share of perpetrators. The difference from the private sector is in the scope of the fraud committed, the loss of the public trust, the blaring headlines from news media, and difficulty in making necessary changes to combat the problems. A good definition of Fraud, Waste and Abuse (FWA) can be found in U.S. Air Force Regulations and can be applied to any government (or private) organization, it states: Fraud—â€Å"Any intentional deception designed to unlawfully deprive the Air Force of something of value or to secure from the Air Force for an individual a benefit, privilege, allowance, or consideration to which he or she is not entitled. Waste—‘The extravagant, careless, or needless expenditure of Air Force funds or the consumption of Air Force property that results from deficient practices, systems, controls, or decisions. The term also includes improper practices not involving prosecutable fraud. Abuse—‘Intentional, wrongful, or improper use of Air Force resources.†[2] Fighting abuse is not an easy prospect. Elected officials, executives, managers, staff, and the public must be vigilant and thorough. In this project we will review some specific cases of FWA. We will also explore why enacting laws and regulations isn’t enough to stop people from committing fraud. Educating people about what FWA is and why they should not commit these crimes should be an integral part of any FWA program. The Department... ...ublic Management class, CSU Dominguez Hills, April 24, 2001. [10] Project on Government Oversight. http://www.pogo.org/ [11] â€Å"Special Investigations Unit Report Regarding The Composite Center, Inc.† Texas State Auditor’s Office, Special Investigations Unit. Report Number 01-004, October 2000. [12] â€Å"Program Fraud†. The Last Word. November 2000, Volume 3, Number 4. [13] 9/2000 Major Criminal Tax Conviction in Trust Scam Case http://www.taxhound.com/ [14] â€Å"Union county woman convicted for Health Insurance Fraud.† Office of the Attorney General news release, March 22, 2000. [15] The False Claims Legal Act Center. http://www.taf.org/ [16] The Bauman & Rasor Group, Inc. http://www.quitam.com/ [17] Robert K. Elliot, CPA and John J. Willingham PhD, CPA, Management Fraud: Detection and Deterrence. New York: Petrocelli Books, Inc., 1980, pp. vii. Fraud, Waste and Abuse Research Project Essay -- Government Business A Fraud, Waste and Abuse Research Project Combating fraud in the private sector is a difficult task. Trying to combat fraud in the public sector is daunting. In 1999 15.7% of the American workforce were employed by a government entity (federal, state, and local).[1] Mirroring society, government will have its share of perpetrators. The difference from the private sector is in the scope of the fraud committed, the loss of the public trust, the blaring headlines from news media, and difficulty in making necessary changes to combat the problems. A good definition of Fraud, Waste and Abuse (FWA) can be found in U.S. Air Force Regulations and can be applied to any government (or private) organization, it states: Fraud—â€Å"Any intentional deception designed to unlawfully deprive the Air Force of something of value or to secure from the Air Force for an individual a benefit, privilege, allowance, or consideration to which he or she is not entitled. Waste—‘The extravagant, careless, or needless expenditure of Air Force funds or the consumption of Air Force property that results from deficient practices, systems, controls, or decisions. The term also includes improper practices not involving prosecutable fraud. Abuse—‘Intentional, wrongful, or improper use of Air Force resources.†[2] Fighting abuse is not an easy prospect. Elected officials, executives, managers, staff, and the public must be vigilant and thorough. In this project we will review some specific cases of FWA. We will also explore why enacting laws and regulations isn’t enough to stop people from committing fraud. Educating people about what FWA is and why they should not commit these crimes should be an integral part of any FWA program. The Department... ...ublic Management class, CSU Dominguez Hills, April 24, 2001. [10] Project on Government Oversight. http://www.pogo.org/ [11] â€Å"Special Investigations Unit Report Regarding The Composite Center, Inc.† Texas State Auditor’s Office, Special Investigations Unit. Report Number 01-004, October 2000. [12] â€Å"Program Fraud†. The Last Word. November 2000, Volume 3, Number 4. [13] 9/2000 Major Criminal Tax Conviction in Trust Scam Case http://www.taxhound.com/ [14] â€Å"Union county woman convicted for Health Insurance Fraud.† Office of the Attorney General news release, March 22, 2000. [15] The False Claims Legal Act Center. http://www.taf.org/ [16] The Bauman & Rasor Group, Inc. http://www.quitam.com/ [17] Robert K. Elliot, CPA and John J. Willingham PhD, CPA, Management Fraud: Detection and Deterrence. New York: Petrocelli Books, Inc., 1980, pp. vii.

A Passage to India: Imperialism

Discuss Forster’s portrayal of Imperialism in the novel a passage to India A passage to India by E. M. Forster is a novel which deals largely with the political, economic and social takeover of India by the British Crown. The novel deals widely with colonialism and more specifically, imperialism. Forster presents the theme in question through the lives and minds of the characters from both the Indians and the English people. There is no subjective undertone to the novel and we see clearly how each character feels, politically correct or not. Forster successfully presents different scenarios and relationships with the assistance of symbolism and imagery, for us to imagine and determine a path to where it may lead; based on the concerns the book shows us. The narrative plays host to an array of themes and consequences present for both parties. The way in which Forster captures the imperialist ideology against the backdrop of a wondrous India and its people has been done so to give the reader a completely unbiased focal on the themes, but still create an enduring curiosity to how the back-story will affect the current affairs. With the thought on imperialism, rather than take the novel on a tangent of complete political movement, Forster chose to focus on people, relationships and the development of characters. Through this liberal approach it allows the reader to delve into the matter with an open mind, to develop own opinions and comments. To allow for all sides and notions to be represented, Forster seemed to develop a character for each. The idea that Indians would be facing an uphill battle trying to forge friendships with the English was represented in characters such as Hamidullah who implies that possibly both races can be friends but never under the current circumstances, and represented less progressively in Mahmoud Ali who presents a stubborn anti-British attitude. The ignorance of the British arrival in India is not unnoticed in the characters of Adela and more extremely in Ronny, who not only suffers from ignorance but has adopted the belief that he is superior to all Indians. Towards the beginning of the novel, or before the pinnacle turning point in the novel, Dr. Aziz and Fielding appear to be the level headed characters representing both races. Dr. Aziz is introduced in the opening chapters venting his frustration about the way the English treat him and other Indians, but never resorts to derogatory remarks or insults. He always appears to maintain a clear outlook to how he feels and why. Fielding, a British Official working in India demonstrates a humanitarian attitude towards Indians and treats them with kindness. As the novel develops and further embarks into the theme of Imperialism, these two characters allow us to see how this factor can affect and damage morals, relationships and opinions. The characters are almost representatives of the theme in question and they take the reader through the journey of the rise and fall, the pros and cons and the damage imperialism and colonialism as a whole can cause. The portrayal of Imperialism in the novel is largely unbiased from Forster himself. In the novel Forster exposes all emotions and attitudes from both races, because the novel is not written from the perspective from one race, or one side – it is written from the perspective of people – all anxiety and true emotion is exposed with little room for covering up British snobbery or submissive Indians, all is advertised. The ignorance on both parties is available, whether or not the ignorance is justified or not is irrelevant as it is all personal opinions. As Hamidullah says† They all become exactly the same, not worse, not better. I give any Englishman two years, be he Turton or Burton. It is only the difference of a letter. And I give any English woman six months. All are exactly alike. † Ch. 2 page 8; His feelings towards English appears bitter being that he was once treated with respect as a guest in England but in his own country due to Imperialism he is the enemy, the disobedient and the inferior, he seems exhausted and could possibly have at one point enjoyed the company of Englishmen when he was a visitor in their own country. It is evident now that he feels all Englishmen are hopeless, in the end they all conform to the Imperialistic movement and behaviours which encourage racism and a general bad attitude to the Indians. Hamidullah notably gives English women a much shorter tether probably being that they only communicate on a personal or sociable level and have no need for professional pleasantries before adopting the imperialistic traits. Forster himself having lived in India is divulging an exaggerated experience of his time there, he is magnifying issues which are completely evident in the force of Imperialism but had never been acknowledged in this way before. There will always, like with any topic be novels which contribute mere nods to the opposition with a main focus on the protagonists encounters, this is not what Forster set out to do. His approach, although himself anti-imperialist is very liberal in that he highlights and presents the Englishman, his â€Å"undeveloped heart† and narrow-mindedness to an unknown world to which he must adapt, or mustn’t as the story goes. An issue what can also be questioned in the novel is if Imperialism itself is the problem, or the way in which the British conduct themselves when India, under Imperialistic ruling. The behaviour of the British can be summoned on many different tangents from Imperialism. The topic of race and supremacism is rooted throughout the novel as a side note to the bigger picture of Imperialism. It is clear from the novel that with British ruling an automatic entitlement to superiority is present, as said by Mrs Turton to Adela. Adela being a somewhat open minded individual displays no major signs of racism or gives the notion she is superior to the Indians, but nonetheless Mrs Turton imposes an extremely heavy remark on her as it were quite trivial – â€Å"You're superior to them, anyway. Don't forget that. You're superior to everyone in India except one or two of the Ranis, and they're on an equality. To say such a racist remark so unintentionally demonstrates the notion that Indians are to submit to the British because that’s the way it is. There is no method in the madness of allowing Imperialism to develop further division with racism and disrespect to the host and their country. This deterioration is evident in the relationship between Dr. Aziz and Fielding. The relationship between Fielding and Dr. Aziz is almost a representation of the Imperialistic ti me, and how it developed. From the beginning of the novel the reader understands both characters have equal respect for one another and their races. There is an understanding of differences but maturity to overcome these nonsensical differences and forge a friendship. This can be seen in light of Imperialism, where there was a forced unity of cultures, this could forge new friendships, allow cultures to sample the traditions of others and increase quality of life and become cultured. Instead, a stubborn and adamant behaviour from the British forged nothing but resentment between both races and begun the belief that the take-over of the land equated to no equality. Translated into the novel, the incident which saw Dr Aziz face trial for the accusation held against him by Adela in the caves shows us where the friendship deteriorated, the relationship between both races which came to be, which was condemned by Hamidullah in the beginning had begun to conform to what Imperialism appeared to represent. After Adela dropped her accusation against Aziz, and everything was as it was in the beginning of the novel it was suggested Aziz and Fielding should resume their friendship but on reflection Aziz agrees with Hamidullah – there is no room for friendship between the Indians and the British. Their relationship, unlike that of the many other characters was not superficial. There was true equality amongst the men, noting definitely their differences but not considering they were of inferiority or superiority to one another. They represent both cultures as well as equal men but the ever present Imperialism is there to collapse any bridge of friendship, as Aziz implies there will be no friendship until the British have left, or left on the principles in which they arrived. At the end of the novel Fielding questions Aziz as to why they cannot be friends, because they both want to be? This shows the reader that there is still a sense of naivety in Fielding that he and the rest of the British have to work on. They do share the same perspective as the Indians, the problems which have arose and how they can be resolved is seen by Aziz. Aziz knows that there is no room for friendship, at least not now – â€Å"they didn't want it, they said in their hundred voices ‘No, not yet,' and the sky said ‘No, not there† Ch. 37. And so it can be seen that the theme of Imperialism throughout Forster’s novel is seen from many dimensions, the idea of Imperialism, and colonialism can be seen to be infected, the unnecessary behaviours which they have assumed go hand in hand with Imperialism have to be stopped. The portrayal of Imperialism by Forster as said is a very liberal and open minded approach in that he has exposed all dimensions and has no shied away from the resting fact of what should be questioned – Imperialism, or the way in which the British conduct themselves behind the wall of Imperialism. What they consider acceptable and what is not. The novel in its entirety delivers an excellent insight from all perspectives into the system. The reader is left with Forster’s own personal experiences and sometimes his own personal statements throughout the novel whilst being given the opportunity to identify the flaws in the system for themselves. Forster, E. M A Passage to India, 1994